Emergency heat repair visit to restore comfort in Greater Birmingham, Alabama.
Emergency heat repair visit to restore comfort in Greater Birmingham, Alabama.
Emergency heat repair visit to restore comfort in Greater Birmingham, Alabama.
Emergency heat repair visit to restore comfort in Greater Birmingham, Alabama.
Emergency heat repair visit to restore comfort in Greater Birmingham, Alabama.

TOP RATED BIRMINGHAM HVAC BUSINESS

Heat Pump Installation in Birmingham, AL

Ethridge HVAC installs heat pumps for homes across Greater Birmingham, including Hoover, Alabaster, Bessemer and Fultondale. We've been family-owned since 1978, and customers rate us 4.9 stars across more than 1,100 reviews. To book a heat pump installation assessment, call (205) 428-6935.

HVAC tech checking duct temperature rise during heating service in Birmingham, AL.

Family-owned since 1978 | Licensed & insured | Serving Greater Birmingham

How residential heat pump installation works

These are the steps of a typical Ethridge HVAC heat pump replacement. Most installs take about a day once the equipment is chosen.
Ethridge HVAC handles residential heat pump installation and heat pump replacement in Birmingham, AL and the towns around it. We install Trane, Ruud, RunTru and Mitsubishi heat pumps at every efficiency level, from standard systems to high-efficiency inverter-driven models. Every install starts with a proper sizing check of your home, so the system you get is the right size for the house you live in. We're licensed in Alabama (AL 14085 / AL 22286) and insured, and our technicians are certified and trained.

1. Home assessment and sizing (about 2 to 3 hours)

A technician visits your home and works out how much heating and cooling it needs, based on its size, insulation, windows and ductwork. Sizing by square footage alone is how homes end up with a system that runs too often or can't keep up.

2. Choosing the system

We go through the brands and efficiency levels that suit your home and budget, with the SEER2 and HSPF2 rating of each.

3. Removing the old system (about 3 to 5 hours)

We disconnect and remove the old unit and dispose of it, and check that your electrical supply suits the new system.

4. Installing the new heat pump (about a day)

We set the outdoor unit and indoor air handler, connect the refrigerant lines, wiring and thermostat, and calibrate the system.

5. Testing (about 1 to 2 hours)

We run the system in both heating and cooling, complete the final safety and efficiency checks, and show you how to use it.

Heat pump brands and efficiency levels we install

  • Trane heat pumps
  • Ruud heat pumps
  • RunTru heat pumps
  • Mitsubishi inverter-driven heat pumps, including ductless systems

Every new split-system heat pump has to meet the federal minimum of 14.3 SEER2 for cooling and 7.5 HSPF2 for heating, which has applied since January 2023. SEER2 measures cooling efficiency and HSPF2 measures heating efficiency, and higher numbers mean lower running costs. We install systems at the minimum and well above it, and we'll talk you through the ratings of each option so you can compare.

High-efficiency models usually use inverter-driven compressors. Instead of switching fully on and off, the compressor speeds up and slows down to match what your home needs. In a Birmingham summer, those longer, gentler run times also pull more moisture out of the air.

Heat pump installation across the Birmingham metro

Birmingham. Our office is at 5121 15th Ave N, Birmingham, AL 35212, and we install heat pumps in homes across Greater Birmingham.

Hoover. Heat pump installation in Hoover, AL follows the same assessment and testing steps as every Ethridge install, for homeowners throughout Hoover.

Alabaster. Ethridge HVAC installs heat pumps in Alabaster and across Shelby County, including Pelham, Helena, Chelsea and Calera.

Bessemer. We install heat pumps for homes in Bessemer and the surrounding communities west of Birmingham.

Fultondale. We install heat pumps in Fultondale and the communities north of Birmingham.

We also serve Leeds, Trussville and Pell City.

Why homeowners choose Ethridge HVAC for heat pump installation

  • Family-owned since 1978, with no private equity involvement.
  • 4.9 stars across more than 1,100 reviews.
  • Licensed and insured in Alabama (AL 14085 / AL 22286), with certified, trained technicians.
  • Four major brands, Trane, Ruud, RunTru and Mitsubishi, at every efficiency level.
  • 24/7 emergency service if your system stops working.
  • Service after the install. Our Cool Club maintenance plan includes two tune-ups a year to keep your new heat pump running well.

Book a heat pump installation assessment

Looking for heat pump installation near you in Greater Birmingham? Call Ethridge HVAC at (205) 428-6935 or contact us online to book a home assessment. We'll size your home and talk you through the options.

SAVE MONEY BY JOINING THE

Routine Tune Ups

Lower Repair Costs

Improved Efficiency

Heat pump installation FAQs

Who installs heat pumps in Hoover, AL?

Ethridge HVAC installs heat pumps in Hoover, AL. We install Trane, Ruud, RunTru and Mitsubishi systems at every efficiency level, starting with a sizing assessment of your home. We're family-owned since 1978 and rated 4.9 stars across more than 1,100 reviews. Call (205) 428-6935.

Who installs heat pumps in Alabaster, AL?

Ethridge HVAC installs heat pumps in Alabaster, AL and across Shelby County. Each install includes a home assessment, removal of the old system, installation and full testing, and most take about a day. Call (205) 428-6935.

Who installs heat pumps in Bessemer, AL?

Ethridge HVAC installs heat pumps in Bessemer, AL. We're a licensed Birmingham heating and air company (AL 14085 / AL 22286), family-owned since 1978, installing Trane, Ruud, RunTru and Mitsubishi heat pumps. Call (205) 428-6935.

Who installs heat pumps in Fultondale, AL?

Ethridge HVAC installs heat pumps in Fultondale, AL and the communities north of Birmingham. We size every system to the home and install standard and high-efficiency models. Call (205) 428-6935.

Who installs high-efficiency heat pumps in Birmingham, AL?

Ethridge HVAC installs high-efficiency heat pumps across Greater Birmingham, including Mitsubishi inverter-driven systems and high-efficiency Trane, Ruud and RunTru models. We'll compare the SEER2 and HSPF2 ratings of each option with you. Call (205) 428-6935.

What should I look for in heat pump installation contractors?

Look for a contractor licensed in Alabama who sizes the system from a home assessment, not square footage alone, and explains the SEER2 and HSPF2 ratings of each option. Reviews from local customers help too. Ethridge HVAC is licensed (AL 14085 / AL 22286), family-owned since 1978 and rated 4.9 stars across more than 1,100 reviews.

Is an energy-efficient heat pump worth it in Birmingham?

Often, yes. An energy-efficient heat pump with higher SEER2 and HSPF2 ratings uses less electricity to heat and cool your home, and inverter-driven models also control humidity better in Birmingham summers. How much you save depends on your home and the system you're replacing, so we compare the options for your house before you decide.

What efficiency rating does a new heat pump need?

A new split-system heat pump must meet at least 14.3 SEER2 for cooling and 7.5 HSPF2 for heating, the federal minimum since January 2023. That's the same as the older 15 SEER and 8.8 HSPF ratings. High-efficiency models rate well above it.

How long does a heat pump installation take?

Most Ethridge HVAC heat pump replacements take about a day of installation, after a 2 to 3 hour home assessment. Removing the old system takes about 3 to 5 hours, and testing takes 1 to 2 hours.

Do heat pumps work in Birmingham winters?

Yes. Heat pumps heat well in Birmingham's climate. On cold days the outdoor unit runs a defrost cycle to melt frost off its coil, which is normal, and electric backup heat can kick in to keep rooms comfortable.

When should I consider heat pump replacement in Birmingham, AL?

A heat pump 12 years or older is worth having evaluated, especially if it breaks down often, heats or cools unevenly, or your energy bills keep climbing. We'll tell you plainly whether a repair or a replacement makes more sense. See our heating services for repairs.